Home  ·  Forum  ·  Contact us  ·  Online Shop   VFD Test Reports Follow us on Twitter Follow us on Facebook     Visit our Portuguese site
ittiphong
I HAVE GE256X64B FIRMWARE VERSION F093  2 UNIT
OLED interface Asynchronous baud rate 115200 bps  the jumper J0,J1 is Shot
Oled Can Show Picture and Character.  
Oled Disply Everything is Work Good .
After 1-2 day not Work SBusy pin low always.
no change  Display off.
Can't Show Everything. 
I am Check Serial Port is ok.
vcc=3.3v 
gnd=ok.
Help me please.
Thank you from answer. 
Quote 0 0

Add a Website Forum to your website.