Hi Noritake VFD,

Thank you so much for all your help!

Hi Noritake VFD,

Thank you so much for all your help!

Hi Noritake,

Yup that is correct!

Thanks that code makes sense, I'll give it a shot.

I have successfully saved  an image to FROM2 using GTOMP from watching the Youtube series. The next step to recall this image using the program macro would be the funtion CopyBmp right? If so does this function only work a byte at a time? And is there a reason FROM is broken up, for example why is there an 'aE =00' an then a 'aE =01~04' with different adresses?

Hi Noritake VFD,

Thanks for your quick response!  Basically I'm designing a new embedded system and would like to add touch screen functionality. The main system has some pretty tight timing considerations and we don't want it to get bogged down by the touchcreen which is why we chose the GT-CP series, it can act as a SPI peripheral and can run its own code. I need the touchscreen to display a few images (1-2) and then act as a menu to change various parameters like temperatures. 

I've succesfully run a .dat file on my GT-CP module however i'm still not able to get the macro code to recall an image from FROM, i've been primarily relying on the examples provided with Msousi. I guess I should first ask, should I be looking at the ' "Program macro" Specification ' or the "Msousi Program Macro compile Manual" ? 

Hi Noritake VFD,

Thanks for your quick response!  Basically I'm designing a new embedded system and would like to add touch screen functionality. The main system has some pretty tight timing considerations and we don't want it to get bogged down by the touchcreen which is why we chose the GT-CP series, it can act as a SPI peripheral and can run its own code. I need the touchscreen to display a few images (1-2) and then act as a menu to change various parameters like temperatures. 

I've succesfully run a .dat file on my GT-CP module however i'm still not able to get the macro code to recall an image from FROM, i've been primarily relying on the examples provided with Msousi. I guess I should first ask, should I be looking at the ' "Program macro" Specification ' or the "Msousi Program Macro compile Manual" ? 

Hi All, 

I'm using Windows 10 and when I connect my touchscren module it comes up under Serial Bus Devices as  'GT800X480A-C903PA' When i open up Msousi it seems the only way to connect to the touchscreen is via COM port? I've tried using the GU-TFT Tool but it seems that this tool does not work with Windows 10?  I've also successfully been able to connect to GTO TOOL and GTOMP, however i'm trying to develop P/Macro code. Any suggestions or workarounds would be wonderful. 

Thanks, 

TZ