Hello Michael, Sorry for our late response. Could you let us know your contact info to support you directly if yo...

Hello, I'm trying to replace my VFD in my card shuffler and I can't find a diagram or know what the 10 pin la...

Hi Everett, Thanks for posting and sending a technical support request via our website. Our sales & customer suppo...

I need help with a new CU24025-UW2J vfd module I've had it for a little over a year but it hasn't been use...

Thipok, It seems like you are trying to use gray-scale mode on the VFD. If this is true, we are unable to help ...

Thanks for your concern, There's the reason that I need to bypass the on board controller to get the highest upda...

Hellp Thipok, It seems you have modifed one of our products by directly wiring your controller to the VFD tube'...

Hello, Recently I got the GU144X40-K610A8 display. It's really nice Graphic display and really fast update too. b...

That is great to hear! Glad the 74HC04 solved your issue. If you have any other questions or issues, feel free to ...

Thank you. I included a 74HC04, which allowed me to interface with the VFD. I was even able to do a little bit of col...

Thank you. According to its datasheet, the GU256x64D-7000BX display's asynchronous serial interface can accept...

yes, It's a GU256x64D-7000BX

Hello Stingpie, The GU-7000 Arduino code library has not been tested with the RP2040.Therefore, there may be some ...

Hello, I am trying to connect more advanced microcontrollers to my GU7000, and the arduino library that comes with th...

Hello Ian, Have you tried disabling hex mode with the [0x1B, 0x42] byte sequence? While in hex mode, the d...

Hi Everyone, Does anyone know anything about this display? yes I know its about 20 years old, just because it'...

Hello Hofstee, In order to properly support your fuse issue, please fill out our contact us form: https://www...

Hi, I'm not sure exactly what happened but it seems like I've blown Fuse 1 on my CU24063-Y1A module. As fa...

Hello Berg, We are unable to find part number VAD3265 in our database. Can you please verify this part number? ...

Good evening. Where can I find the datasheet or connection scheme for the ITRON VAD3265 module? Thank you.

This product was discontinued more than 25 years ago, so we cannot guarantee the information on this post is accurate...

I have an older character vfd module ISE Electronics/ Japan model CU205ECPB-11AS that I need the spec sheet for....

Hi Noritake VFD, Thank you so much for all your help!

TZ, Happy to help! If you have any more questions, don't hesitate to create another post or contact us...

Hi Noritake VFD, Thank you so much for all your help!

TZ, I would recommend using the Print statement followed by the hexadecimal command generated by GTOMP in the Memo...

Hi Noritake, Yup that is correct! Thanks that code makes sense, I'll give it a shot. I have successfully...

TZ, Is your plan to use a program macro to display a couple images and then act as a slave when switching to the m...

Hi Noritake VFD, Thanks for your quick response!  Basically I'm designing a new embedded system and would...

Hi Noritake VFD, Thanks for your quick response!  Basically I'm designing a new embedded system and would...

Hello TZ, Yes, the only way to connect to a GT-CP module using Msousi on Windows 10 is with a COM port. If you hav...

Hi All,  I'm using Windows 10 and when I connect my touchscren module it comes up under Serial Bus D...

Varun, Maybe instead of using fprintf(s,'\n'), can you send hex values 0A and 0D to the display? Also, ...

hi Thanks for your replay After your rpl i even tried with carriage return and Timeout. But still getting same ...

Varun, It looks like your code is sending '\n' instead of a carriage return line feed (CRLF). Have your...

Moka, Thank you for providing your code. I would like to clarify your exact issue. When you execute your cod...

hi noritake i am using the module GU256x64D-3900 VFD module with firmware version-F333B2416. I am sending the seri...

hi the following below is my matlab code s=serial('COM3','BaudRate',38400,'Timeout',10,...

Moka, That is quite strange behavior. Is your matlab code only sending "Hello World" to the display? (like...

Thank u Noritake The data Which I am sending to the VFD display unit through matlab  is displayed only for a ...

Moka, Can you explain your issue in a bit more detail? I am having a difficult time understanding your most rec...

Thanks Noritake i am receving the data whatever am sending.But For the same code sometimes the data transmitted is...

Moka, Can you check your signal voltage? The display module expects 5V signals. Additionally, make sure you hav...

Moka, Can you check your signal voltage? The display module expects 5V signals. Additionally, make sure you hav...

hi the default configurations of signal and jumper configurations only used. i tried with different baudrates also bu...

hi thanks for your suggestion i tried with EVEN parity but didnt get the output. I am trying to check for jumper conf...

Moka, Be sure to check all comunication settings from your hyper terminal session. Not only baudrate, but&nbs...

hi thanks for your reply. Actually i got the display finished product form from the vendor company so i dont have ...

Hello Moka, Thank you for your question. First off, could you provide your signal wiring and jumper configurati...

hi am using CU20045SCPB-T31A VFD display. How to transmitt international font using matlab

Hi i am using CU20045SCPB-T31A VFD Display, through MATLAB am trying to send data using serial communication and thro...

Sergey, If this display is manufactured by Noritake, It will have the Noritake itron logo on the back side of ...

Thanks for the answer. I got acquainted with the products manufactured by other manufacturers of VFD displays and ...

Sergey, Thank you for your question. It looks like this is not a Noritake display module.  You may be a...

Hello everyone. I have a VFD module that I could use in my devices. But I do not know his model to work with him ...

Brad, Great to hear! If you have any other questions, don't hesitate to ask. Best Regards, Norita...

Thanks, That worked, your tools can now see the display.

Brad, Thank you for the information. Our GT-CP VCOM driver is not compatible with Windows 10. GT-CP module...

Hi, The first thing I did was jumper JP1 to allow the USB Vbus to power the board. Before plugging it in I install...

Hello Brad, We have replied to your other post and will continue to support you there. Noritake VFD

Hello Brad, Can you explain exactly how you connected your GT-CP module to your PC as well as the su...

I can't seem to get past the Windows 10 unsigned driver error when plugging the display into the USB port. Any so...

I am trying to connect to my new module I receive to evaluate but I can't get past the Windows 10 Error about an ...

Hello Taichi, My recommendation would be to change the edges of your button to be a slightly less-intense colo...

Hello Taichi, Thank you for your question. There are a couple ways you can reduce the start-up time of your...

David, We are happy to help. Please see the following related command information: 1. ASCII Commands are...

Hello Noritake Team, thank you very much, u helped me a lot as u can see. Display is working as expected now. L...

Hello Noritake Team, thank you very much, u helped me a lot as u can see. Display is working as expected now. L...

David, For your reference, please see the following pinout image. This figure is looking at the module'...

Hello David, Thanks for sharing the display module image.  That was not CU165ECPB-T2J and it looks more ...

Hello Team, thank you for the reply, but this module has 12 PINS not only 5 Pins. In the meantime i found nearly a...

Hello David, Thank you for your post. We just replied the pin assignment info to your other post. https://forum.n...

Hello David, Thank you for your post. We assumed that the correct part number is CU165ECPB-T2J. However, the CU16...

Hello Noritake Team, im looking for datasheet or a pin definition for a VFD module CU165ECPB/D. I try to connect i...

Hello Noritake Team, may u could help me, im looking for a datasheet or pinout definition of a CU165ECPB/D VFD mod...

Hello Taichi, You can stop a program macro when serial data is received with the following program macro code: ...

How do you get the macro to stop when serial data is received?  Can a specific hex sequence be used for triggeri...

I’m working on an iDev demo and I’m wondering if the start-up time could be reduced. Right now it take...

I'm using the command-based module with the ST library and the MixtureDisplayMode to display a button image. ...

Hello Herve, In order to help solve your issue, we need a bit more information. What is the product number ...

Hello ! I'm from France and my english is not very good so sorry for my writing. Hope there is still active...

Hello BurchSung,Thank you for your post.If you would like to discuss your custom "flexible" keypad project further wi...

Hi...I am gonna design but i couldn't find any reference from the internet regarding design for such a touch matrix k...

Seems like neither solution will work.  It needs to fit within the same space. so it could be the same size or s...

Hello Scoobis,Unfortunately, we do not have a replacement module for the GU256X64-312 that is similar/same size and c...

I'm looking for a replacement for a GU256x64-312send me a private message if you know a source.does anyone know ...

Hello levaclaus,Thank you for your post.Unfortunately, this is a custom module and we are unable to disclose the data...

Hi. I need help. I found this display GU170x40 - 301 on the shelf. But I can not find data sheets for him in any...

 This is the code that was demonstrated in part 4.5 of the GU-TFT tutorial series.[CODE]#include SoftwareSerial ...

Hello Enrico,Thank you for your post!We would be more than happy to help you solve your space problems.If you don't m...

I search a solution for an aircraft paneland I have space problems!ideal solution is 8 characters with 16x16 dot matr...

Thank you very much for your support, everything is working great now!

Ed,It's good to hear that your problem was fixed!Concerning RDY signal monitoring, RDY needs to be monitored when sen...

Thank you very much for your reply,    We have done more tests on the logic analyzer, and finally managed t...

elafargue,Thank you for your post.Concerning the display errors and timing, are you polling the RDY signal? It is pre...

 I am integrating a GU256x128-3900 on a design. The display is driven in DMA mode on its parallel port.  &n...

Thanks. I sent you my email.

o.j.capella,Unfortunately, this board was not fully developed and was only used for a short time for demo purposes on...

Hello,Can you kindly provide me with the I2C specification so that I can communicate with the controller on the 4 x 3...

Hello Jack W8ADQ,We received some information that may be helpful when determining the correct filament voltage. Unfo...

Hello Jack W8ADQ,Thank you for your interest in our VFD tube technology.The FG85C1A1 was discontinued over 10 years a...

iTron FG85C1A1 8 Digit 7 Seg and D.P. VFD Hello everyone! I have a couple of these old calculator VFDs and am t...

As seen during the past few months, posting spam will result in an immediate ban. We do not tolerate any form of spam...

Hello Everyone!We are very happy that you are getting involved in the Noritake community! This forum just went throug...

hello!i purchased a VFD CU16025-UW6J for replacing my old LCD on HD44780 chip, but i have a problem: from right to le...

So I want to hook up a CU20024-UX3J, SYNC IO only, to my PC, and of course PC don't do SYNC.So, HOW TO DO THIS?  ...

Hi. I cannot find any information about display part number CU16026SCPB-S display. Can anyone help? The pcb of t...

Hello Everyone, I am Aravind Chakravarti, from Bangalore, India.I have a query. I am using GU280x16G-7000 VFD. My que...

Hi all,I need some help if possible.I have been looking for this display information since long time, but without res...

We have been using GU140X16G-7002 displays, but have been told that these are obsolete now. The recommended replaceme...

I HAVE GE256X64B FIRMWARE VERSION F093  2 UNITOLED interface Asynchronous baud rate 115200 bps  the jumper ...

The CU-Y series (I'm specifically using the CU24063-Y1A) has the ability to store a user-defined font in Flash ROM.&n...

[QUOTE=Prawit Korsri]Hi          now i got GE256X64B-7032B 2 pc , i can't find AVR libr...

Hi          now i got GE256X64B-7032B 2 pc , i can't find AVR libraly in "Code library"...

Anybody has / build a library ( class) to use this module on Arduino Due ( SAM / ARM ) hardware?I am working on a sim...

Hello! Not preserved if you have documentation on CF1099GB    

I found an interesting tool :The Poly-Raster Image format http://www.compuphase.com/graphic/polyraster.htmAnybody tri...

Give some support in the form of new example code for your legacy products, this is the best way to build a following...

From what I've seen looking at different datasheets the 300 series almost if not the same as the 800 series. These ar...

From what I've seen you short pin 2-3Look at this GU7000 Application notes to get an idea of what I'm talking about: ...

I have what I believe is a older version of Noritake's network display kit with a GU256x16-322 display. Is there any ...

somebody knows what the diference between the parts i need GU256x128C-3960 and the one that is in sell  GU2...

somebody knows what the diference between the parts i need GU256x128C-3960 and the one that is in sell  GU2...

Hi all,I have the following VFD GU256x128C-3900B,While Power on  the Display is not glowing,but it consumes 740 ...

Hi allI have the following VFD GU256X64-312 which I salvaged.  I want to use this Display with my arduino mega 2...

[QUOTE=chipmikro]I can't see the link for this promotion. [/QUOTE]unfortunately:This promotion has ended but new eval...

I can't see the link for this promotion.

I keep getting an error when submitting the form. Really interested in this!This is the error:Warning: mysql_connect(...

First of full line up of VFD Module with I2C interface

GU140x32F-7003 only has serial interface, either UART or USART.

Found (a kind of) DMA mode in GU-3xxx spec.Writing speed may be faster..I have not tried it yet though.

Hello All,I have got a new GU140X32F - 7003 VFD, I connected a VCC and ground to its pin 2 and 1 (parallel interface)...

Discuss new technologies

Arduino_Noritake_VFD_GU7000.zip doesn't work for me. I'm wondering if there isn't a problem with changes to the ardu...

Hmm, this slipped under the radar.  I did manage to get the display going.Did you have problem getting started w...

Here's another video of the SCK-3900-512x32H-01, this time being driven from a controller that's more along the lines...

1) Same problem as everyone else: connectors!2) Initially I used a RS232 converter with a Linux box, final applicatio...

Did you have problem getting started with the module?          yes, coul...

    Did you have problem getting started with the module? - No, just need the connector.  &n...

Did you have problem getting started with the module?No issues here, I have an existing commercial library for the GU...

Product InfoThis product GE Module(Both OLED Panel and PCB) is "Made in Japan".Command set is compatible with GU-7000...

Did you have problem getting started with the module?How did you connect the display with your deviceWhat did you use...

Did you have problem getting started with the module? Finding the proper connector was difficult. Other than that, no...

[QUOTE=azer]>>>>> I find this forum software to be far more painful to use than the module.[/QUOTE]Why?

                                 ...

To receive New Promotion and Products informationSubscribe the Noritake newsLetter  http://www.noritake-elec.com...

Did you have problem getting started with the module?Connector issue----  Serial Connector     2....

Did you have problem getting started with the module? Other than locating proper connectors and the 24v supply, no re...

1. Did you have problem getting started with the module?it took a while to wait for parts to connect it.. (power boos...

Did you have problem getting started with the module?   I did not know I would need 24v. Other than that, i...

Did you have problem getting started with the module? Tracking down the right connectors and ensuring the right volta...

Please provide us with the following feedback:1. Did you have problem getting started with the module?Having only use...

Did you have problem getting started with the module?No.  Have used many Noritake displays.How did you connect t...

1. Did you have problem getting started with the module?I had a little trouble getting the display hooked up at first...

Did you have problem getting started with the module? Like the others said, the initial wiring was a little difficult...

Your link doesn't work. Anywhere to purchase these things? I have disliked using the cheap chinese OLED displays as t...

Did you have problem getting started with the module?  I agree that finding the proper connector was difficult. ...

Did you have problem getting started with the module?How did you connect the display with your deviceWhat did you use...

Did you have problem getting started with the module?  my only problem was finding a connector for the module. i...

Thank you for your continued support of Noritake Co., Inc. and its full line of VFD modules and services. Please help...

Thanks for your report;http://www.instructables.com/id/Arduino-and-the-Noritake-24x6-VFD-Module-Vacuum-Fl/

http://youtu.be/mBSmEdL-GwwHere is a video of it running... Thank you for all your help!

Worked!Thank you!

[QUOTE=kylej1050]I've got a GU144x16D-7053B and have not been able to get this code to work. Below is the example cod...

I've got a GU144x16D-7053B and have not been able to get this code to work. Below is the example code.[CODE]#include&...

[QUOTE=Tristan]Yes, that is the same code I was referring to.Are you using the SCK-7003-112X16G-N16?[/QUOTE]ther...

Image of GU512X32H-3900B     for  12" Slim Message Display 

Just for reference;  The display module of SCK-7003-112X16G-N16 is 7003.USARTSynchronous Serial interface UART(C...

Yes, that is the same code I was referring to.Are you using the SCK-7003-112X16G-N16?

Try the attached sketch. Worked on Arduino 1.0.5.

I have a SCK-7003-112X16G-N16 display.I am using it with Arduino.The sample code works great for synchronous communic...

Color filters        Connectors AssyCables AssyMetal parts AssyFunction modificati...

Interface to hostParallelClocked serialUARTRS232/full,halfSPII2CGPIO for GU3xxxB Series8bit I/O + 4bit inputOptionset...

Screen format       -20x2 characters 7mm ch height in 20x2 5mm footprint for improve vi...

Series and featuresGU-7000 Parallel 8bit and RS232GU-7003 :Clocked and UART Serial-7xxxB : SPI    ...

Sample of 16x15 dot fontNot only indicating Chinese characters this dot format is capable to indicate following uniqu...

Thank you.Yes. CJK stands for Chinese,Japanese and Korean.Actualy, Chineses( Traditional and simplified chi...

"TE-200K Chinese,Japanese and Korean"This means CJK font capability,doesn't it? Each character position has 16x15 dot...

Hi !.I think TE is capable to indicate CJK fonts.Am I correct?Lupin05

Noritake Core Technology Collaboration Fine patterning,Glass,Ceramics,Vacuum,Semicon,EmbeddingWelcome small scale tes...

Clean visibility and effective EMI attenuationSuper Fine Aluminum Etched Mesh  EMI Shield Window  

Evaluation Kit (Image)  4.3" sizeKeypad Printed sheet behind the touch glassAtmel AT42QT2120  I2C IF on boa...

As part of on-going commitment to develop future engineers, Noritake Co., Inc. Electronics Division is offering Evalu...

GU-U100 Series GU128X64E-U100 is a LCD compatible Graphic VFD Module.In addition to KS0108 commands this module featu...

Noritake Spring Discount Sample Sale Starting Mar.10, 2014 ending Apr.10,2014Sale at Noritake Onlineshop50% discount ...

Refer Brochure of GE256X64C-7032B

Noritake OLED module officially released in US?

Thank you for your request. We start shipping the kits Feb 26, 2014

Noritake 12" 12keyx1line capacitive KeypadSize :Approx 350x48mm(330x25mm effective area)  same size as GU512X32H...

Noritake 4.3"  4x3 Capacitive KeypadTransparent Glass Touch Switch Controller Board :Noritake Evaluation Kit

Noritake GE-7000 OLED Module

Noritake GU-7000 VFD Module-7000 Parallel 8bit and RS232-7003 :Clocked and UART Serial

Noritake GU-3900B VFD ModuleIntelligent Text/Graphic commandsGeneral purpose IF :8bit I/O + 4bit Input portMacro prog...

Noritake CU-TE VFD ModuleRS232 InterfaceUSB InterfaceTE-200A ASCII and Euro fontsTE-200K Chinese,Japanese and Korean2...

Noritake CU-Y VFD ModuleVersatile Character Displaysinterface        -Y1A   :...

Noritake CU-U Series VFD ModuleHD44780 compatible command VFD moduleLCD direct drop-in replace modelsCompact models f...