tbloedel
SCK-3900-512X32H-01
Apr 25, 2014

Please provide us with the following feedback:

1. Did you have problem getting started with the module?
  • Having only used the smaller Noritake VFDs in the past, I did not realize initially that it required *2* power sources (5V and 24V), and assumed it was probably one or the other.  Once I realized that, it worked flawlessly.
2. How did you connect the display with your device
  • Initially, with direct serial connection to PC, to evaluate using the Noritake GUD-10K software.
3. What did you use the display for?
  • Testing as a logging display for an commercial communication system.
4. Which processor/MCU/OS did you use?
  • Initially, direct PC connection (using Windows w/ GUD-10K) then later with linux-based script (ARM6-based dev board)
5. What type of commands would you like to see?
  • The command set is actually quite well-developed, but it could be very handy to have a "terminal mode" which could act as a direct serial display.
Feedback