 | Brad
|
Problems Trying to connect to the new GTWV050C3A00PA 5" LCD module
Oct 28, 2019
Thanks,
That worked, your tools can now see the display.
Problems Trying to connect to the new GTWV050C3A00PA 5" LCD module
Oct 28, 2019
Hi,
The first thing I did was jumper JP1 to allow the USB Vbus to power the board. Before plugging it in I installed USB_VCOM_driver_installer.exe
Then I plugged it into my power USB hub. The display backlight came on and the device was reconized in the device manager but gave current error you see in the above post screenshot. Here is the device tree after plugging in the display
Problems Trying to connect to the new GTWV050C3A00PA 5" LCD module
Oct 28, 2019
I can't seem to get past the Windows 10 unsigned driver error when plugging the display into the USB port. Any solutions to get around it.
Problems Trying to connect to the new GTWV050C3A00PA 5" LCD module
Oct 28, 2019
I am trying to connect to my new module I receive to evaluate but I can't get past the Windows 10 Error about an unsigned driver. Is there a way to get this driver to work without disabling my secure boot in the bios?